How to vacuum an Inground Pool Video

How to vacuum an Inground Pool Video

RELATED PRODUCTS:

Poolmaster 33435 1-1/2" x 35' In-Ground Vacuum Hose - Classic Collection

  • For use with all pool vacuums
  • Swivel cuff for kink-free maneuverability
  • UV and chemical resistant,1-1/2" diameter x 35'
  • Spiral wound construction for strength, flexibility, and maximum flow rate
  • Superior tensile strength for crush-resistant operation
  • The swivel cuff end connects directly onto the vacuum head and the non-swivel end connects to the skimmer
Poolmaster's Classic Collection offers a generous selection of performance and built-to-last products made from resilient components designed to keep your pool sparkling. For use with any pool vacuum, the In-Ground Vacuum Hose features flexible, yet durable EVA and non-corrosive material. A swivel cuff is built in for kink-free maneuverability during the cleaning process. The spiral-wound construction adds strength, aids in flexibility and provides maximum water flow. Superior tensile strengt
List Price: $ 39.69 Price: $ 31.49


Infitary® Vacuum Cleaning Robot with Remote Control T1, Lower Nosie/ Dust purification/ Anti-drop System Design (Red)

  • The new Intelligent Obstacle Avoidance: Speedy to avoid obstacles like furniture automatically, active & smart to protect your Vacuum Cleaner and furniture
  • Strong suction with easy operation: Just press CLEAN button and it starts the cleaning automatically. It can even suck in micro particles, dirt and hair
  • Ultra slim body: It is only 2.4" height, suitable for any places like under beds and sofas
  • Lower noise: Noise level below 50db, suitable for any working or learning environments
  • Performs well on tile, wood,laminate,carpet(Short hard Carpet). Long (shag) rugs and rattan rugs are not suitable for this vacuum robot.
Features

Drop prevention: Preventing drop sensor function, you do not need to worry about cleaning on the desktop and other height space
Prevent obstruction: It can take the initiative to quit while there is no other way to go.
Suitable working areas: for ceramic tile, wood, linoleum and marble floors.
Super adsorption capacity: It can easily clean the floor, dust purification rate up to 95%, the cleaning efficiency up to 98%.
Low-noise design: Noise is less than 50DB,
Price:

Share this post

Comments (19)

  • SoulPapo Reply

    Does one pay for quality or brand when shopping for vacuums? I'm trying to find a deal. But don't know what to look for.

    July 30, 2016 at 11:20 pm
  • Sherida B Reply

    please advise my pool pump is not working. is there any way I can keep it clean without using the filter and pump? I just paid 1200 to open the pool and cannot afford new pump at this time.

    July 31, 2016 at 12:04 am
  • Iain Laird Reply

    Would have liked to have seen where you plugged the vaccum hose in the skimmer, seems to me this is an important part of vacuuming.

    July 31, 2016 at 12:20 am
  • Reginald Finley Reply

    My skimmer's suction is too weak. :-(

    July 31, 2016 at 12:59 am
  • Peter Pecksen Reply

    Very helpful video, thank you. Well ordered and presented.

    July 31, 2016 at 1:54 am
  • Amanda Bright Reply

    Cute Crocs!

    July 31, 2016 at 1:55 am
  • crispycrazycard Reply

    I have a question Jason… How do I adjust my speed on my pool vacuum? I have an old style hayward with flappers on each side it works good however it just runs slow. I also have an inground pool as well. Can I resort to doing it the way described in your video or is there another alternative that I can do? Please help! Thanks so much for your time and consideration!

    July 31, 2016 at 2:39 am
  • Kelly Wenzel Reply

    Great refresher – thanks! I had a pool as a teen and just moved to a house with a pool that we had to give a lot of TLC to get it running.

    To those who commented: "What filters the debris?" or "Vacuuming up the debris will clog your system if you don't filter it first." I have to say from experience that this type of vacuuming is for maintenance only. If you have a lot of debris you first need to get a net with a scraper edge that is designed to pick up larger amounts of leaves and other things at the bottom. Do that first and then vacuum. If you have too much debris for this method then you need to vacuum to WASTE – and that is a different process.

    July 31, 2016 at 3:04 am
  • TheAcapulcosol Reply
    July 31, 2016 at 3:37 am
  • brianr9424 Reply

    only problem I seen was when you used the return line to fill the vac hose anything on the bottom by the vac head is stirred up

    July 31, 2016 at 4:32 am
  • tiffany baxter Reply

    thank you tons this help lot! :)

    July 31, 2016 at 4:34 am
  • Cathy Mathis Reply

    my dad got his first pool in the 70.s and this is they way he taught us as kids. He is gone now, but I even  to this day do mine this way. I.m in my 60.s I have to get in the pool to hook the hose up.  But it still works.  All of the Videos I have watched this is the only one I have seen done this way.

    July 31, 2016 at 4:48 am
  • sue bidlake Reply

    thanks really helpful and simple makes it all so much easier to understand

    July 31, 2016 at 4:58 am
  • Bill Eveleth Reply

    Thanks, very helpful

    July 31, 2016 at 5:10 am
  • TheUndefined Decimal Reply

    thank you so much!

    July 31, 2016 at 5:30 am
  • Juan Velazquez Reply

    thank you! so much ><

    July 31, 2016 at 5:45 am
  • Cedema Rivera Reply

    Sooooo awesome!!!! Thanks!!! 

    July 31, 2016 at 6:11 am
  • JACQUI ELLIS Reply

    you explain this so well :)

    July 31, 2016 at 6:49 am
  • Cinci Pools Reply

    For regular vacuuming leave the valve set to filter. After vacuuming or if you begin to loose suction/ turn the pump OFF/ switch to backwash/ turn on pump for aprox. 2 min/ turn pump OFF/ switch to rinse until the glass peep sight runs clear/ turn the pump OFF/ switch back to filter.

    July 31, 2016 at 6:54 am

Leave a Reply

Your email address will not be published. Required fields are marked *